AG SPRAY ACCESSORIES LOW-FLOW BRASS PRESSURE REGULATOR n 1/2" MPT Inlet n 1/2" Outlet n Temperature: 120o F n Weight: 10.3 oz n For sprayers pumping up to 5 GPM n Durable and strong brass construction n Stainless-Steel Spring n Positive Viton Seal to prevent leakage n Knurled locknut for easy adjustment PART NO. 8.712-553.0 8.712-554.0 OLD NO. 462207 462208 DESCRIPTION 200-650 PSI 0-300 PSI NYLON PRESSURE REGULATOR Maximum corrosion resistance. n Male Inlet / Female Outlet n Temperature: 120o F n Weight: 4 oz n Up to 15.0 GPM n Stainless-Steel Spring n Positive Viton Seal to prevent leakage and provide best chemical resistance n Knurled locknut for easy adjustment n Tee-Handle Adjustment Screw n Choice of 1/2" or 3/4" Inlet / Outlet PART NO. 8.712-555.0 462212 1/2" 3/4" 8.712-552.0 462202 3/4" 8.712-556.0 462213 3/4" BULKHEAD FITTINGS n Black Polypropylene n Double-Threaded with EPDM Gasket n Opening same size as outside diameter OLD NO. INLET OUTLET ADJUSTABLE PRESSURE RANGE 0-250 PSI 0-250 PSI 0-400 PSI 3/4" 3/4" PART NO. 8.709-377.0 OLD NO. 310851 PART NO. OLD NO. 8.705-139.0 140417 8.705-140.0 140419 8.705-141.0 140420 9.802-149.0 9.802-150.0 BRASS BULKHEAD / TANK FITTINGS n Use to drain or remove liquids from tanks, drums, etc. n Heavy-Duty Brass n Includes nut and aluminum grip water OVERALL LENGTH MOUNTING HOLE DIA 1/8" x 1.5" 140421 140422 1/4" x .94" 1/4" x 1.5" 3/8" x 1.3" 1/2" x 1.5" Note: Installation requires access to inside of tank DIAPHRAGM CHECK VALVES - NYLON For drip-free spraying. n PSI: 125 n Operating Pressure PSI: 10 n GPM: 2.0 n Nylon Body, Polypropylene End Cap - EPDM - Diaphragm n 1/4" MPT Inlet, 11/16" - 16 Male Outlet Nozzle Thread n Spring-backed diaphragm for positive actions DESCRIPTION Diaphragm Check Valves n DO NOT USE... Polypropylene for: gasoline, nitric acid, trichlorethylene, toluene, aromatic hydrocarbons or kerosene. Polypropylene "P" - black / glass reinforced n DO NOT USE... Nylon for: hydrochloric acid, chlorine, fluorine, nitric, xylene or phosphoric or sulfuric acids. Nylon 6/6 "N" white / natural color. TWIN-DIAPHRAGM SPOT SPRAY PUMP 5/8" 3/4" 3/4" 1" 1-1/8" PART NO. 8.705-336.0 8.705-338.0 8.705-144.0 8.705-145.0 8.705-339.0 8.705-341.0 8.705-342.0 8.705-146.0 8.705-147.0 8.705-343.0 Gasket for Above 8.705-337.0 8.705-340.0 8.705-344.0 OLD NO. 141232 141234 140430 140432 141236 141238 141240 140434 140436 141242 141233 141237 141243 FPT 1/2" HOLE DIA 1-5/8" 3/4" 3/4" 1" 1" 1-1/4" 1-1/2" 1-1/2" 2" 2" Fits 1/2", 3/4" Fits 1", 1-1/4", 1-1/2" Fits 2" 1-5/8" 1-3/4" 1-3/4" 2-1/2" 2-1/2" 2-1/2" 3" 3" 3-1/8" n PSI: 35 (#8 Tip) n GPM: 1.0 (Open) n 3/8" Hose Barb Inlet / Outlet n Self-Priming to 2.5 Feet n Operating Temperature: 40o - 110o F n Liquid Temperature Max: 110o F n 5 Amp Fuse n Dry Weight: 1.3 lbs n Chemical-Resistant Valves and Diaphragm n Compact automatic on-demand operation PART NO. Specifications, product descriptions and product availability subject to change without notice. OLD NO. 8.702-326.0 100880 n Sealed pressure switch automatically stops pump when discharge valve opens and closes n Self-priming so pump can be located above supply tank n Can run dry for extended periods without damage n Built-In Thermal Protection on 12V DC Motor n Low-Amp Draw (2.5 at 25 PSI, 4.0 at 35 PSI) DESCRIPTION OPEN Spot Spray Pump, Max 35 PSI, 12V DC 1.0 255
258 Publizr Home