BURNERS OIL BURNERS PART NO. 8.709-317.0 8.709-318.0 8.709-319.0* OLD NO. 307000 307003 307007 115V and 220V Wayne Burner Chart n 75 to 3 GPH Firing Rates n Solid-State Ignition (Low Amp) n High-volume 6-1/4" blower on 220V unit, 5-3/16" blower on 110V unit n 3,450 RPM Pump / Blower Motor PART NO. 8.709-317.0 IGNITOR 8.700-802.0 / 079111 FUEL PUMP 8.700-749.0 / 079030 220V Wayne Burner Chart PART NO. 8.709-318.0 IGNITOR N/A FUEL PUMP 8.700-749.0 / 079030 Note: DESCRIPTION Wayve 115V TRANSFORMER 8.700-804.0 / 079115 SOLENOID VALVE 8.700-779.0 / 079030 MOTOR 8.701-095.0 / 079612 ELECTRODE ASSEMBLY 8.700-770.0 / 079052 BLOWER WHEEL 8.700-730.0 / 079005 TUNE UP KIT 8.700-774.0 / 079056 n "A"-Type Suntec Fuel Pump n 3-3/4" air tube with adjustable flange for maximum versatility n UL-Recognized DESCRIPTION 115V AC Burner W/ Oil Valve 230V AC Burner W/ Oil Valve 12V DC Burner W/ Oil Valve *Proper operation requires an engine with 16+ Amp alternator and deep-cycle battery on nightly, overnight recharge DESCRIPTION Wayve 220V TRANSFORMER 8.700-809.0 / 079123 SOLENOID VALVE 8.700-780.0 / 079063 MOTOR 8.701-094.0 / 079611 ELECTRODE ASSEMBLY 8.700-770.0 / 079052 BLOWER WHEEL 8.700-731.0 / 079006 TUNE UP KIT 8.700-774.0 / 079056 8.700-721.0 - Coupling for 8.700-740.0 FASCO motor used on MET to FASCO converted burner 8.700-720.0 - Adapter Bushing to allow MET blower wheel to work with FASCO motor 8.700-740.0 - Conversion Kit, use MET to FASCO conversion kit if 12V burner motor cannot be identified. The kit contains the following parts: 8.700-739.0 Motor, 8.700-720.0 Adapter Bushing, 8.700-682.0 Adapter Plate, 8.700-721.0 Coupling, 8.700-691.0 Screws (2), 8.700-104.0 Nuts 12V Wayne Burner Chart n 12V Solid-State Ignitor PART NO. 8.709-319.0 IGNITOR 8.700-807.0 / 079120 BLOWER WHEEL 8.700-727.0 / 079003 FASCO, 2.44” W x 2.53” T, 5/16” Shaft, 8.700-728.0 / 079003A, MET 3.44” W x 4.25” T FUEL PUMP SOLENOID VALVE 8.700-770.0 / 079052 Note: 8.700-774.0 / 079056 with 8.700-721.0 Coupling for converting from MET to FASCO 8.700-721.0 - Coupling for 8.700-740.0 FASCO motor used on MET to FASCO converted burner 8.700-720.0 - Adapter Bushing to allow MET blower wheel to work with FASCO motor 8.700-740.0 - Conversion Kit, use MET to FASCO conversion kit if 12V burner motor cannot be identified. The kit contains the following parts: 8.700-739.0 Motor, 8.700-720.0 Adapter Bushing, 8.700-682.0 Adapter Plate, 8.700-721.0 Coupling, 8.700-691.0 Screws (2), 8.700-104.0 Nuts n 3,450 RPM Fuel Pump DESCRIPTION Wayve 12V TRANSFORMER N/A MOTOR 8.700-739.0 FASCO / 079021, 8.750-715.0 MET to FASCO 079021X n .5 to 2.75 GPH Capacity with Oil Valve Specifications, product descriptions and product availability subject to change without notice. 205
208 Publizr Home