UNLOADERS, INJECTORS, VALVES & GUAGES SERIES 505 STAINLESS-STEEL All metal parts are stainless-steel n PSI: 5650 n GPM: 8.0 n Temperature Max: 195°F n 3/8" Inlet, Outlet n Premier Type Injector n Teflon® O-Rings PRESSURE REDUCER / INJECTOR - EXTACT-A-FLOW "Low side" chemical injector that regulates inlet pressure to maintain consistent chemical ratio. n GPM: Up to 6.0 n 1/2" FPT I/O Ports n 1/4" Hose Barb Chemical Inlet n +2% Injection Ratio Variation PART NO. OLD NO. DESCRIPTION GPM PSI 8.710-586.0 360505 / 1.8 Stainless-steel Injector 1.8 2.0-3.6 5650 8.710-587.0 360505 / 2.1 Stainless-steel Injector 2.1 2.7-4.9 5650 8.710-588.0 360505 / 2.3 Stainless-steel Injector 2.3 3.3-6.0 5650 8.704-027.0 109234 Repair Kit INJECTOR - ADJUSTABLE QUICK-CONNECT n PSI: 3500 n Temperature Max: 200°F PART NO. OLD NO. 385125 385126 DESCRIPTION 8.711-162.0 385127 Weep Seat* 8.711-160.0 8.711-161.0 8.904-389.0 Non-Weep With Switch** 8.904-390.0 385129 385128 Hose Barb W/ Viton Check Hose Barb W/ Buna Check * Weep Seat allows pump to self-prime ** With burner control switch automatically turns burner off when water flow stops ADJUSTABLE BRONZE FLOAT VALVES n Temperature Max: 180°F n Cast-Bronze Body n Adjustable Float Arm n Live Rubber Stopper PART NO. 8.710-502.0 8.710-503.0 8.710-504.0 Acid Injectors OLD NO. DESCRIPTION 360240 360242 360244 GPM Adjustable QC, 200o Adjustable QC, 200o Adjustable QC, 200o 8.904-221.0 360240A Adjustable QC, 200o 8.904-222.0 360242A Adjustable QC, 200o 8.904-223.0 360244A Adjustable QC, 200o Injector Repair Kit Injector Acid Kit 8.701-187.0 080055 8.900-087.0 080056 INJECTORS - BRASS All metal parts are brass n PSI: 3200 n Temperature Max: 190°F n 3/8" Inlet, Outlet n Premier Type Injector F F F F F F PSI 2.0-3.0 3500 3.0-5.0 3500 5.0-8.0 3500 3500 3500 3500 3500 2.0-3.0 3.0-5.0 5.0-8.0 PART NO. OLD NO. THREAD 8.710-045.0 343306 1” STEM GPM AT 40 PSI 1/4”-20 47 Note: Float valves above require stem and float, below Repair parts for adjustable valves 8.700-475.0 076406 Long Arm* 8.700-476.0 076407 Short Arm* 8.700-477.0 076408 Thumb Screw* 8.700-479.0 076418 3/8” and 1/2” Plunger *Fits 3/8”, 1/2” and 3/4” valve only STEMS ONLY 9.802-157.0 PART NO. OLD NO. 9.802-157.0 343310 8.710-047.0 8.710-051.0 343315 PART NO. OLD NO. 8.710-505.0 360245 8.710-506.0 8.710-507.0 360246 360247 8.704-028.0 109235 DESCRIPTION Brass Injector 1.8 Brass Injector 2.1 Brass Injector 2.3 Repair Kit GPM PSI 2.0-3.6 3200 2.7-4.9 3200 3.3-6.0 3200 8” 343310C 8” 10” SS Brass SS Parts for other float valves also available 8.710-047.0 LENGTH MATERIAL THREAD 1/4”-20 1/4”-20 x 5/16”-18 1/4”-20 188 Specifications, product descriptions and product availability subject to change without notice.
191 Publizr Home