PUMPS & PUMP KITS PUMP OIL n Quality mineral base lubricating oil ideal for use in high pressure piston precision plunger pumps. Blended with wear, rust and foam inhibitors. GEAR REDUCTION Specifically designed for Legacy and Admiral pumps. n Engine-to-Pump Drive Units n 2.1 to 1 Reduction Ratio (3,675 Eng. RPM = 1,750 Pump RPM) n Engine Shaft Size = .0984" or 1" or 1-1/8" PART NO. 8.923-425.0 DESCRIPTION PART NO. Pump Oil 10W40, Quart PUMP LUBE n A premium-quality lubricating oil fortified with additives to reduce friction, foaming and corrosion. n Ideal for use in heavy industrial applications requiring hydraulic based lubricant. 8.710-332.0 8.710-333.0 8.715-344.0 8.715-342.0 8.749-925.0 8.749-922.0 8.754-767.0 OLD NO. 349120 349121 DESCRIPTION 24 mm Pump x 1” Engine 30 mm Pump x 1” Engine 25 mm Pump x 1” Engine 24 mm Pump x 1” Engine 24 mm Pump x 0.984” Engine 24 mm x 3/4” Engine 25 mm Pump x 1-1/8” Engine GEAR REDUCTION Fits Admiral, Interpump, AR, Comet, Udor and Hawk. PART NO. 8.756-854.0 9.808-016.0 OLD NO. 112056 112076 PUMP LUBE n General Pump gear lube is a multi-viscosity SAE 80W 90 lubricant with anti-friction, anti-foaming and corrosion-inhibitor additives. Use in Admiral Geared Speed Reducers and Interpump / General RS99, RS151, PTO as well as other high-speed gear boxes. DESCRIPTION n Engine-to-Pump Drive Units n 2.18 to 1 Reducer n For 11-18 HP Gasoline Engine n For Pumps with a 24 mm Shaft Pump Lube, Quart Case Lot, Qty 12 PART NO. 8.710-335.0 8.710-336.0 OLD NO. 349130 349131 DESCRIPTION 1” Engine Shaft 1-1/8” Engine Shaft ANTI-SEIZE COMPOUND Recommended for all metal-to-metal, power-drive assemblies. Facilitates removal after use. PART NO. 8.756-728.0 DESCRIPTION Gear Lube, 2-1/2 Gallons COMPLETE PUMP EXTRACTION KIT PART NO. n 13 mm - 24 mm in a Carrying Case n Slide Hammer n 13 mm, 15 mm, 18 mm, 20 mm, 22 mm and 24 mm Sockets n Fits General Pumps PART NO. 8.723-619.0 174 DESCRIPTION Extraction Kit Specifications, product descriptions and product availability subject to change without notice. 8.704-638.0 8.704-641.0 OLD NO. 112299 112305 n Copper-Graphite or Nickel n Copper-graphite high-torque for high temperature to 1800o F n Nickel continues to work up to 2400o F n Stops rust, galling and seizure on pulley / shaft or gear / shaft interfaces DESCRIPTION Blister Pack, 1 application, Copper - Graphite 8 oz Brush Top Can - Nickel
177 Publizr Home