Valves, Instrumentation & Control
INDEX INSTRUMENTATION: - Transmitters - Analyzers - Switches - Gauges - Valvs - Tubing & Fittings VALVES: - Hand operated - Control - Actuators PIPES, FITTING & ACCESORIES: - Carbon steel - Stainless Steel - Flanges, elbows, fittings SAFETY / RELIEF VALVES ONLINE TEST: - AccuTEST KT-3000 Safety Valve Test System Evaluated by EMA
Valves, Instrumentation and Control CONTROLS offers a service of quality and high reliability in the verification and calibration of its process instruments, maintenance to control valves, motorized and manual, civil and electrical works; As well as the supply of qualified and experienced personnel to attend the aforementioned maintenance areas. Somos competentes en todos los niveles de la organización y estamos totalmente involucrados y comprometidos con el cumplimiento de nuestro SGC basado en la norma ISO 9001:2008. At CONTROLS we put at your service our experience in: – Preventive and corrective different types valves hand operated, control and safety/relief (Disassembly, General cleaning, Contribution of seats, Lapping Test contact Leakage maintenance. – Supply of parts and accessories for valves (Elbows, Tee's, Couplings, Nipples, Unions, Connections, etc). Inserts, Reductions, test during calibration)
Valves, Instrumentation and Control - Supply, Assembly, Maintenance, Calibration of conventional instruments and with fieldbus protocol, HART, a wide range of variables (temperature, flow, level, pressure, analyzers, vacuum, among others). - Installation of stainless steel and copper tubing. - Assembly of instrumentation (Racks, cabinets, panels, process lines). - Preventive and Corrective maintenance to control valves and actuators (electronically operated, with Solenoids, Positioners (DVC) of 3 - 15 PSI or 4 - 20 mA, and intelligent control). Instrumentation & Control: Supply, Maintenance, Assembly, Modification, Verification and Calibration.. Specialists in Maintenance and Supply of: Control Valves, Electric Actuators, Manual Valves.
Valves, Instrumentation and Control
Transmitters for industry Pressure transmitters are used for the control of pressure systems. They can also be used to control them by means of a regulation and control system. Controls has a large variety of brands for supplies and trained technical personnel to perform maintenance services. • They comply with the FM, E5 regulation: Explosion-proof for class I, division 1, groups B, C and D. Dust-proof for class II, division 1, groups E, F and G. Dust-proof for class III, division 1. Factory sealed, Type 4X Cover. CERTIFICATIONS AND REGULATIONS: -ATEX, Exia, -IEC Ex, -EAC, -UL, -WARS IEC 61000-4-3 IEC 61000-4-4 • Comply with FM I5 regulation: Intrinsically safe for use in Class I, Division 1, Groups A, B, C and D; Class II, Division 1, Groups E, F and G; Class III, Division 1; (T = 40 ° C), T3 (Ta = 85 ° C), Type 4X cover IEC 61000-4-6 IEC 61000-4-5 IEC 60068-2-6 FM IS/XP CSA IS/XP - Pressure Transmitters - Diferencial Pressure Transmitters - Capacitive Transmitters
Transmitters for industry Temperature transmitters allow you to linearize and condition a signal. With a temperature transmitter it is possible that signals from thermocouples and RTD extend lengths beyond which the sensors alone allow, guaranteeing a highly stable signal Especifications: - Input for 1 Thermocouple or RTD. - Configuration of 2, 3 and 4 threads - Accept Pt500, Pt1000 and Ni100 signals. - Outputs at 4 to 20 mA, Direct voltage. - HART protocol channel Product Certifications - FM Approvals : * Northamerica: E5, I5 * Europe: E1, I1 * Internacional: E7, I7, N7, NG, NK The following standards and regulations are complied: -Case type 4X, IP66 and IP68. -Norm NAMUR NE 21 -Norm IEC 60770-1: 1999 -Norm IEC 60770-1: 2010 -Directive 2004/108 / EC -IEC 61326: 2006. Temperature Transmitters
Transmitters for Industry Flowmeters allow you to follow best measurement practices across all applications by eliminating leakage points and incorporating seamless, vibration-free meter body designs and enabling best installation practices. - Immunity to vibrations - Replaceable sensor - Available with fieldbus functionality that includes device diagnostics - Output 4-20mA or mullivariable Certificaciones del producto -FM approvals: * Northamerica: E5, I5, IE, K5, E6 I6, K6, IF, * Europe: E1, I1, IA, N1, ND, K1 * Internacional: K8, E7, I7, IG, N7, E3, N3, I3 The following standards and regulations are complied: -Case type 4X, IP66 and IP68. -Norm NAMUR NE 21 -Norm IEC 60770-1: 1999 -Norm IEC 60770-1: 2010 -Directive 2004/108 / EC -IEC 61326: 2006. Flow Transmitters
Transmitters for Industry Ideal for a wide range of liquid applications, including chemicals, oil, water and wastewater. Ultrasonic level contactless technology performs very well in aggressive environments and provides greater reliability and accuracy than other devices that work in contact with the liquid. Main Features : - Access to magnetometer diagnostics via the local operator interface (LOI), a HART and AMS field communicator, or Suite: Intelligent Device Manager. - Integral and remote configurations available - HART / analog and pulse outputs available - Soldered and sealed coil housing - Variety of industry standard process connections • Explosion-Proof with Intrinsically Safe Electrodes for Class I Division 1, Groups CD: T3 ... T6 • Non-Incendive with Intrinsically Safe Electrodesfor Class I, Division 2, Groups ABCD: T3 ... T5 • • Dust-Ignition Proof for Class II / III, Division 1, Groups EFG: T2 ... T5 Enclosure Type 4X, IP66 / 68 Certifications: EN 61326-1: 2013; EN 61010-1: 2010; FM Approvals: N5, K5, Level Transmitters
Analyzers for industry They offer a wide range of measurement options including differential conductivity, double oxygen, pH / ORP / ISE, Resistivity / Conductivity,% Concentration, Chlorine (Total, Free, Monochloramine, pH independent free), Oxygen, Ozone, Turbidity, Flow and 4-20mA current input and many other combinations supporting most industrial, commercial and municipal applications. • • • • EASY TO INSTALL INTUITIVE MENU SCREENS • MULTI-LANGUAGES • ELECTRICALLY ISOLATED ENTRIES 4-20mA OUTPUT RELAY OUTPUTCONECTORES REMOVIBLES • HART, FOUNDATION OR FIELDBUS COMMUNICATION PROTOCOL THAT ALLOW ACCESS TO ASSET MANAGEMENT SYSTEMS (AMS). CERTIFICATIONS • ISO 17025 • NEMA 4X IP66 • PED 97/23/EV • ISO 14001:2004 • NADCAP MATERIAL TESTING • ISO 9001:2008 & AS 9100 VER. C -Oxygen -Color -ph -Ozon dissolved - Dissolved gases - Natural gases, etc.
Switches for Industry We offer a range of ranges of pressure, vacuum, differential pressure and temperature, as well as process connections, materials in contact with liquids and types of sensors. FEATURES: • Class I, Div.1 and 2 (Zone 1), Class II, Div. 1 and 2, Class III • One or two SPDT selection, optional DPDT output • Diaphragm welded bellows sensor • Ultra Low Ranges APPROVALS: • UL (USA y Canada) • CE Directiva ATEX (94/9/EC) (Europa) • PED 97/23/EC • (LVD) 73/23/EC y 93/68/EEC Pressure Switches, Differential Pressure Switches Level Switches, Limit Switch
Gauges for Industry Mechanical and digital pressure gauges for relative pressure, absolute pressure and differential pressure FEATURES: • IP65 Encapsulation Accuracy ± 0.1% up to ± 0.5% • Vacuum Pressure Range up to 20,000 psi • Optional 4-20mA output • Optional SPDT Switch Output - Analog - Digital - Pressure and Differential Pressure APPROVALS: • IP 54 per EN 60529 / IEC 60529 (with liquid filling 1) IP 65 - VdTÜV - CE conformity ATEX directive – EAC – GOST – PTB - CRN – KOSHA – Ex – IECEx - IEC – DNV-GL - With switch - Temperature - Alarms - Glycerin
Instrumentation valves Shut-off valves, compensation, purging and ventilation for differential pressure gauges, measuring liquids, gases and vapors. • • Direct mounting capability • NACE MR 0175 / ISO 15156 ASTM G93-96 - Compact and lightweight design -NACE MR 0103 -ASME B31.1 Instrumentation valves and manifolds
Instrumentation fittings High quality connectors and valves for Instrumentation as well as other components for high and ultra high purity processes. • • • • • Direct mount capability • NACE MR 0175/ISO 15156 ASTM G93-96 SAE DIN ISO - Compact and lightweight design -NACE MR 0103 -ASME B31.1 -JIS -NFPA -MIL -Tubing -Reductions -Connectors -Tees -Clamps -Coples -Supports -Unions
Valves for Industry Valves for safety, health of personnel and protection of customer's property •Valves designed according to API-602 and ASME B16.34 •Carbon steel according to ASTM A216 Gr. WCB, A105, etc. •Stainless steels conforming to ASTM A351 Gr. CF8, CF8M, F316, etc. •Stainless steel with low carbon content according to ASTM A351 Gr. CF3, CF3M, CG3M, etc. •Super stainless steels conforming to ASTM A351 Gr. CN7M (Alloy 20), CN3M (Alloy 20 Modified), CT15C, etc. •Brass according to ASTM B283 Gr. C37700. Carbon steel for low temperatures according to ASTM A352 Gr. LCB, LCC or LF2, etc. - Gate -Needle - Three ways - Globe - Check - Four ways - Knife - Solenoid - Tempering - Ball - Butterfly
Valves for Industry Actuator control valves are designed to provide a wide range of control valves for water, oils and most industrial fluids There are many different types of valves in the world, but the most commonly used hand valves in steam systems are those of balloon, ball, gate and butterfly. Ball valves provide quick closure with a low pressure drop in the fluid, because the Ball rotates 90 ° for closure and the effect of turbulence is minimal. 3-way valves are usually connected as a mixing valve, but can also be used as a bypass valve or selector valve. The butterfly valve is suitable for low pressure applications (125 lbs). They are characterized by their quick operation as they open and close ¼ turn. Gate Valves are used when a device is required to allow passage or interruption of a fluid. - Gate -Needle - Three ways - Globe - Check - Four ways - Knife - Solenoid - Tempering - Ball - Butterfly
Valves for Industry The modern compact systems formed with a 3-way control valve and actuator are designed to precisely control water, oils, steam and other industrial fluids. There are many different types of valves in the world, but the most commonly used hand valves in steam systems are those of balloon, ball, gate and butterfly. A check valve is a type of valve that allows the fluid to flow in one direction but automatically closes to prevent flow in the opposite direction (counter flow). The solenoid valve is an electrically operated device and is used to control the flow of liquids or gases in the fully open or fully closed position Tempering valves are independent and multiple nozzle valves that provide a fine atomization of the injection water even at minimum flow conditions. - Gate -Needle - Three ways - Globe - Check - Four ways Valve and actuator systems are versatile allowing high precision in process control and offer the advantage of full locking function. They can be used for both control and on / off function. - Knife - Solenoid - Tempering - Ball - Butterfly
Actuators for Industry Pneumatic actuators provide precise throttling or open-closed control on sliding stem valves. The double-acting actuator performs both its Such as recoil by the action of compressed air. It uses both sides of the plunger (air in both chambers), so these components can do work in both directions. Single acting actuator develops a job only in one direction. The plunger is returned by means of an internal spring or some other external means such as loads, mechanical movements, etc. The actuators incorporate sophisticated electronics Actuators of direct action, that allows a non-intrusive commissioning. They are suitable for on / off, modulation and emergency stop services in applications up to SIL 3. opposite to spring. They provide an actuation of diaphragm the automatic the control valve body assemblies. Certifications apporvals: ATEX, FM, CSA, IEC, GOST, CE - Single Action - Pistons - Double Action - Electrical - Membrane - Hydraulic - Spring
Actuators for Industry - Single Action - Pistons - Double Action - Electrical - Membrane - Hydraulic - Spring
Pipes for Industry Seamless and straight-seamed (ERW, SAW and DSAW) Original copper pipe for plumbing, air conditioning and Refrigeration in residential, commercial and institutional installations. The carbon steel pipe is used in a large number of industrial applications handling abrasive and corrosive fluids. It is also used in construction in water ducts, and inside homes for water and gas conduction. Stainless steel tubing is used for chemical and petrochemical processing, liquefied natural gas, marine construction, pulp and paper processing, food and pharmaceutical products, and automotive and aerospace applications. Types and grades : ASTM-A-36, 53, B88, 106, 333, 335, API-5L, X-42, X-52, X-60, X-65, P1, P6, P9, P11, P22 Y P91, 312, 316, 321 , 347 , Duplex 2205, Alloy 20, Nickel 200, Monel 400, Inconel 600, Incoloy 800, Hastelloy C276, Titanio Grado2 y Grado 7.ASME A-179; A-333; A-335; ASTMA-182, A-240, ASME SA182/SA240; - Carbon Steel - SCH 40 - Stainless Steel - SCH 80 - Alloys - SCH 160
Pipe Fittings and Unions WELDING ACCESSORIES IN TOP 10253-1 DIN 2605 / DIN 2606 / DIN 2616 /) DIN 2615 quality steel according to DIN 1626 / DIN 1629 St 37.0 DIN 28011 quality steel according to DIN 1626 / DIN 1629 St 37.0 ASTM A234, A420; MSS SP-83 SME / ANSI B16.28 ASME / ANSI B16.9; ASME / ANSI B16.11 ASTM A-234 WPB; ASTM A-105; ANSI / ASME B1.20.1 ANSI / ASME B36.19; ASTM A182 / A403; ASME SA182 / SA403 BRACES, ELBOWS, REDUCTIONS, COATS, TEES, UNION NUTS, NIPLES, LATROLETS, COPLES, MEDIA COPLES, UNIONS: SOCKET WELD NPT FLANGES: EN 1092-1. EN 10273 P250 GH / DIN 17243 C 22.8 EN 10025-2 S235JRG2 / DIN 17100 Rst 37.2 ASME B16.5; ASME A 105; CLASE 150 – 2500 ANSI B5; ACCESSORIES (FITTINGS) FOR THE DIFFERENT CLASSES OF STEEL PIPES OF CARBON, STAINLESS STEEL, BRONZE, BRASS, COPPER AND ALLOY STEELS EN 1092-1 ASME B16.5 ASME B16.11 ASME B16.28 MSS-SP-95 - Elbows - Couplings - Flanges - Reductions - Tees -Connections - Niples - Unions - Caps
Pipe Fittings and Unions ASTM A-105; MSS SP-95 MSS SP-97 ASME/ANSI B16.9; ASME B16.25; ASME B1.20.1 ASTM A182/A403; ASME A182/SA403 • NIPLES • INSERTS • HALF COUPLINGS • NUTS ASTM A-105; MSS SP-95 MSS SP-97 ASME/ANSI B16.9; ASME B16.25; ASME B1.20.1 ASTM A182/A403; ASME SA182/SA403 - Elbows - Couplings - Flanges - Reductions - Tees -Connections - Niples - Unions - Caps
Valves, Instrumentation & Control On-line test of safety & relief valves Advantage: In addition to the following innovative features and benefits, the AccuTEST system is complemented by the exceptional support and global service AccuTEST Systems Inc. is known for: • Fully automated operation, battery operated motor with two days duration under normal use. • Automatic calculation of tare pressure by measuring lifting force, line pressure and acoustic triggering. • The universal mounting assembly ensures use on all types of valve with exposed rod. • Easy assembly with one hand, with the innovative iris plate and self-aligning stem adapter. • Full range of stem adapters available in metric or English units. • Without hydraulic unit, pistons or cranks. • Lightweight and compact design for easy portability in floor. • The structure allows lifting forces up to 4,500 kg (10,000 lbs). • Calibration of sensors and equipment available.
Valves, Instrumentation & Control On-line test of safety & relief valves Advanced Software Using the most advanced software in the industry, this fully automated system virtually eliminates the possibility of human error during each stage of the operation, from automatic sensor calibration to the collection and display of final test results. The sophisticated software supports different languages and works on the Windows 7 platform on any standard laptop. The integrated database with valve specification information from the largest manufacturers allows you to enter new valve profiles as required. Access to a wide range of options for reports and graphical displays. Report formats include: test information, test result, valve information (with historical data), historical valve maintenance information, and calibration. Files are permanently stored on the computer for better tracking and convenient access and printing of information.
Valves, Instrumentation & Control
Valves, Instrumentation & Control
We have experienced technical staff in
CONTROLS CO SA de CV Calzada Heroico Colegio Militar #1575 Fraccionamiento Villafontana 21180 Mexicali, BC Tel. (686)-555-1383 Web: http://controlsco.mex.tl
1 Publizr